Metal Shoe Rack
SKU: FL-HO-005
Stacking metal shoe rack. 3 tiers, 12 pairs, easy assembly.
| Material | Carbon steel (1.0mm) |
|---|---|
| Manufacturing Process | Laser cutting + bending + powder coating |
| Surface Finish | Powder coating (white/black/silver) |
| Tolerance | ±0.5mm |
| Dimensions | 600×250×600mm |
| Tiers | 3 |
| Capacity | 12 pairs |
| Assembly | Tool-free |
| MOQ | 200 units |
| Lead Time | Quoted after drawing review and process confirmation |
| Sample Time | Quoted after drawing review and process confirmation |
| Sample Fee | USD 80 |
| Price Range | USD 22-40/unit |
| Applications | Home, entryway, closet |
| Compliance | REACH |
| Export Markets | USA, Germany, UK |
How This Metal Shoe Rack Is Fabricated and Checked
A shoe rack is judged on two things that are easy to get wrong: whether the shelf angle lets a pair sit properly, and whether the frame stays rigid when it is pulled out with shoes on it.
| Stage | What happens | What is verified before the job moves on |
|---|---|---|
| Cutting and forming | Side frames, shelves and back rails laser cut and formed | Shelf angle and shelf depth on the first-off. A shelf that is too shallow or too steep lets shoes slide off |
| Shelf forming | Shelf edges folded, with the fixing positions formed or punched | Fold depth against the shelf span, because a loaded shelf in the middle of a long rack deflects if the fold is shallow |
| Frame assembly | Frame welded, or folded and mechanically fixed, to the design | Frame square and shelf levels. A rack that is out of square will not sit flat against a wall |
| Back bracing | Back rails or a back panel fitted where rigidity is needed | That the frame does not rack when it is lifted with shoes on it, which is how it actually gets moved for cleaning |
| Surface preparation and coating | Degrease, phosphate, then powder coat | Film thickness and coverage on shelf edges and the base, which is where a shoe rack gets scuffed |
| Load check | The rack loaded with representative shoes and checked on a level floor | That the shelves do not deflect visibly and the frame does not twist when it is shifted loaded |
| Packing | Flat-packed or assembled to the order’s requirement | That the parts and fixings arrive together and the coating is unmarked |
Adjusting Metal Shoe Rack Metal Without New Tooling
Whether the rack is for display or storage is the first decision, because it sets the shelf angle and depth.
| What can be changed | What it affects | What it does not affect |
|---|---|---|
| Width, height and shelf count | Side frame sizes, shelf span and the packing | The shelf angle, provided the shoe type is unchanged |
| Shelf angle and depth | How shoes sit, and whether they face out or are stored flat | The frame |
| Tilted, flat or tiered shelves | Display against storage, and how much floor space it takes | The frame section |
| Feet or castors | Whether the rack can be pulled out for cleaning | The frame |
| Colour | Powder specification | Nothing structural |
| Flat-packed or assembled | Shipping cost against assembly time on site | The product geometry |
Metal Shoe Rack Metal: Common Buyer Questions
What shelf angle should we use?
It depends on whether the rack is for display or for storage. A steeper angle holds shoes facing out and takes less depth, but the shoes need something to sit against. A flatter shelf holds more pairs standing. Tell us what the rack is for and the angle follows rather than being guessed.
Why does the rack twist when we move it?
Because the back is not braced. A shoe rack usually gets pulled out with shoes on it for cleaning, and without a brace the frame racks out of square. Back rails or a back panel solve it, and they are cheaper than making the whole frame heavier.
Can it be supplied flat-packed?
Yes, and for export it usually is, because the volume saving on a rack this size is significant. The trade-off is assembly time on site and the need for the fixings to arrive complete and identified, so the packing list matters as much as the part.
Shelf angle and back bracing are what make a shoe rack usable and durable, and both are set at the forming stage. Send the shoe type and how the rack will be used through the RFQ form and the shelf is set to it. Related: CNC bending, surface finishing and export packaging.
Tool-Free Assembly and Where It Goes Wrong
A shoe rack sold as tool-free assembly lives or dies on the fit of its joints. The concept is simple – formed tabs engage slots and the structure locks together – but the tolerance stack across four or five parts decides whether it goes together easily or needs persuasion. If the tabs are too tight the customer forces them and bends the part; if they are too loose the rack racks sideways. In 1.0 mm carbon steel the engagement has to be designed with the coating thickness included, because powder coating adds material to both faces of a tab.
- Coating build is allowed for in the forming dimensions, not left to chance. That is why first-piece trial assembly is done on a coated part, not a bare one.
- Capacity of twelve pairs is a count, not a load. Tell us the target weight per shelf if the rack is for boots rather than shoes.
- Three tiers at 600 x 250 x 600 mm is a common format; changing the depth changes how the shelf nests in transit, which affects packing cost.
Flat-Pack Reality: Packing, Shipping and Returns
A product like this usually ships flat-packed, which means the finish has to survive parts rubbing against each other in a box. Edge protection, interleaving and a sensible pack layout cost a fraction of the product and they are the difference between a good review and a return. We discuss the packing method with you at quote stage because it is part of the landed cost, not an afterthought.
Colour options – white, black, silver – are standard powder choices, and a mixed-colour order is possible but it means a colour change on the line, which shows up in the price at low volumes. Send the drawing with the tier count, the target load and the quantity you need for the first run; lead time is quoted after drawing review and process confirmation.
Payment Terms
How a project is paid for is agreed before production starts, and the structure that applies to your order is stated on the quotation and on the order confirmation, so there is no ambiguity later.
- 30% advance payment with the order and the 70% balance before shipment — our standard structure.
- 70% advance payment with the order and the 30% balance before shipment — used for some projects.
- 100% payment in advance before production starts — used for some projects.
If your finance team works to a fixed structure, say so in the first enquiry and we will confirm what applies to your order before you commit. Request a quotation.
Questions buyers ask before sending drawings
The questions that come up most often before a project starts, answered the way we answer them by email.
What do you need from me to quote Metal Shoe Rack?
2D drawings as PDF, DWG or DXF, or 3D files as STEP, IGES or SolidWorks, together with material grade, sheet thickness, surface finish, quantity and destination country. If the drawing is not finished yet, send a photo, a sketch or the existing part instead — we review what can be measured from it and reply with the questions that still need answering.
How long does a quotation take?
Enquiries are answered within one business day. Simple laser-cut and bent parts are quoted within 24 hours. Welded frames, assembled units and multi-part structures are quoted after the drawing review and process confirmation, and the date is confirmed in our reply.
Is there a minimum order quantity?
Prototypes are made from a single piece and small batches of 10–50 pieces are routine. Prototype, first batch and repeat volume are quoted together so the numbers stay consistent as the project scales.
Can you work from a sample or a photo if I have no drawing?
Yes. Send the part itself, clear photographs with a rule or caliper in frame, or a dimensioned sketch. We measure what can be measured, list what is still undefined, and confirm it with you before production.
Need a Similar Part?
Most enquiries that start on a page like this are not an order for Metal Shoe Rack — they are a search for a factory that can make something like it. Send us your drawing, 3D model or sample and we will review the manufacturing process and the quotation requirements, then come back with a process plan, a price and a lead time.
We work from 2D drawings, STEP / DWG / DXF / PDF files, or a physical sample if that is all you have.
No complete drawings yet? Describe the part, send photos or a sketch, or send a sample — we can start from there. Discuss your project.
Trade Terms and Delivery
We quote under the standard Incoterms your logistics team already works with, and build the packing and documentation around the one you choose.
- EXW — you collect from our Ningbo facility and run export clearance through your own forwarder.
- FOB Ningbo — we deliver to the vessel at Ningbo port and handle export clearance.
- CIF — we cover carriage and insurance to your named destination port.
- DDP — we handle carriage, insurance, import clearance and duties through to your door.
Send your destination country, target delivery date and preferred trade term together with the drawing. Request a quotation.
Quotation Time
We quote from your drawings. How long that takes depends on what the part asks for:
- Simple parts — quoted within 24 hours. Laser-cut blanks and bent components, supplied with complete 2D or 3D drawings. Mon–Fri, GMT+8.
- Complex assemblies — quoted after the drawing review. Payment kiosks, multi-part welded frames, enclosures with purchased hardware, or anything needing a coating or assembly trial. We confirm a quotation date once the scope is clear.
Production lead time is quoted separately, after drawing review and process confirmation. Send your drawings.
What stands behind this quotation
- Manufacturing since 20162,500 m² Ningbo plant — 3 laser cutting machines (including newer TRUMPF), 4 CNC press brakes and 10 welding stations.
- Shipped to more than 30 export marketsEnclosures, cabinets and formed parts supplied to OEM buyers across Europe, North America and Asia.
- 123 documented product casesMedical device housings, HVAC and heat pump enclosures, agricultural and livestock equipment, industrial hydraulics, material handling trolleys and EV charging cabinets.
- Factory evidence you can checkTUV Rheinland audit reference MIC-ASI243729 and Bureau Veritas reference MIC-ASR263630 available for buyer review under NDA.
Before you send drawings: an NDA is signed on request · first-article inspection is carried out before a batch continues · pricing is staged from prototype quantity to repeat volume · pre-shipment photos and packing records are prepared when the project needs them.