Balcony Plant Stand
SKU: FL-HO-004
Multi-tier balcony plant stand. Powder-coated steel, weather-resistant.
| Material | Carbon steel (1.2mm) |
|---|---|
| Manufacturing Process | Laser cutting + bending + welding + powder coating |
| Surface Finish | Powder coating (green/white/black) |
| Tolerance | ±0.5mm |
| Dimensions | 800×400×1500mm |
| Tiers | 4 |
| Load | 50kg |
| Weather | Outdoor rated |
| MOQ | 100 units |
| Lead Time | Quoted after drawing review and process confirmation |
| Sample Time | Quoted after drawing review and process confirmation |
| Sample Fee | USD 100 |
| Price Range | USD 50-85/unit |
| Applications | Balconies, gardens, patios |
| Compliance | ISO 9001 |
| Export Markets | USA, Germany, Australia |
How This Balcony Plant Stand Is Fabricated and Checked
A plant stand that lives outdoors has to answer two questions: does it survive the wind, and does the coating survive the weather. Both are decided before it is painted.
| Stage | What happens | What is verified before the job moves on |
|---|---|---|
| Cutting and forming | Frame sections, shelf trays and side panels laser cut and formed | Section straightness and formed tray depth. A tray that is too shallow holds water on the shelf instead of draining it away |
| Drainage provision | Drainage holes or a tray formation that lets water out | Hole positions and the drainage path, because a stand that holds water at the base rusts from the inside out |
| Frame welding and squaring | Frame welded with the shelf levels held square | Diagonals, and that the unit stands without rocking on a balcony surface that is rarely level |
| Fixings and stability provision | Feet or levelling provision, and any wall tie points | Foot flatness, and the stability of a tall frame. A 1.5 m stand on a balcony is a wind load, not just a shelf |
| Surface preparation and coating | Degrease, phosphate, then powder coat, including inside the frame | Film thickness inside the frame and at the welds, which is where an outdoor coating fails first |
| Load and stability check | The stand loaded with representative weight and checked for rock | That it stands stable loaded, and the frame does not twist with the upper shelves full |
| Packing | Frame protected and wrapped for the transport route | That the coating is not chipped in transit, since a chip outdoors is where corrosion starts |
Adjusting Balcony Plant Stand Metal Without New Tooling
Outdoors the base and the drainage decide whether the product lasts, so those are worth settling before the styling.
| What can be changed | What it affects | What it does not affect |
|---|---|---|
| Height, width and shelf count | Section sizes, tray depth and the packing | The base footprint, provided the height stays within its range |
| Shelf type: flat tray or open slats | Water drainage and how pots sit on the shelf | The frame |
| Feet or levelling provision | Stability on a balcony surface that is rarely level | The frame |
| Colour | Powder specification and how it reads against the building | Nothing structural |
| Wall or rail tie points | Wind loading on an exposed balcony | The frame |
| Trellis or hanging rail | Whether it is part of the same frame or a separate item | The shelf layout |
FAQ on Balcony Plant Stand Metal
Will it survive wind on an exposed balcony?
That is a base and fixing question rather than a frame question. A tall light frame with plants on top is a sail, and on an exposed balcony the honest answer is to tie it back to the wall or the rail rather than rely on the base alone. We provide the tie points where the design allows.
How does the coating hold up outdoors?
It depends on the preparation and the coating system rather than on the colour, and the places that fail first are the welds, the inside of the frame and anywhere water sits. That is why drainage and interior coverage are checked rather than assumed.
What stops it rocking on a balcony floor?
Levelling provision, because balcony surfaces are rarely flat and usually have a fall for drainage. Adjustable feet or a shim allowance cost far less than a stand that has to be packed up with folded card on site.
Drainage and the base are what decide whether an outdoor stand is still there in five years. Send the balcony size and the exposure through the RFQ form and the frame and coating are chosen against them. Related: welding, surface finishing and export packaging.
Water Is the Design Problem, Not Weather
An outdoor plant stand is rated for weather, but what actually destroys it is water that stays. Water sits in the tray under a pot, in the fold at the bottom of a leg, inside a tube that was not sealed, and in the lap joint where a shelf meets a frame. Galvanised or well-coated steel handles rain fine and standing water badly. The detailing answer is drainage: open the tube ends or cap them, slope the tray, avoid horizontal laps that hold a film of water, and make sure the coating covers the inside of any section that can get wet.
- 1.2 mm carbon steel with powder coating works outdoors if the pre-treatment is right; the coating is a barrier and a single scratch at a standing-water point becomes a rust line within a season.
- Four tiers at 1500 mm tall carrying 50 kg is a top-heavy arrangement once the plants are watered. Wet soil is heavy, and the weight is at the top.
- Green, white and black are the usual colours; a dark colour in full sun gets hot enough to stress a coating over time.
Drainage, Feet and the Surface Underneath
What a plant stand stands on matters. A balcony in a coastal building gets salt-laden air; a tiled balcony holds water at the grout lines; a wooden deck traps damp under the feet. Feet that lift the frame clear and let water escape are the cheapest corrosion control on the product, and they protect the surface underneath as well. We supply the foot type the drawing specifies and we raise it when a design puts bare tube ends directly onto a wet floor.
If the stand is for a specific pot size, send it. Tray dimensions and tier spacing follow from the pot, and a stand sized for 200 mm pots will not carry 300 mm ones – the load and the spacing both change. Lead time is quoted after drawing review and process confirmation.
Payment Terms
How a project is paid for is agreed before production starts, and the structure that applies to your order is stated on the quotation and on the order confirmation, so there is no ambiguity later.
- 30% advance payment with the order and the 70% balance before shipment — our standard structure.
- 70% advance payment with the order and the 30% balance before shipment — used for some projects.
- 100% payment in advance before production starts — used for some projects.
If your finance team works to a fixed structure, say so in the first enquiry and we will confirm what applies to your order before you commit. Request a quotation.
Questions buyers ask before sending drawings
The questions that come up most often before a project starts, answered the way we answer them by email.
What do you need from me to quote Balcony Plant Stand?
2D drawings as PDF, DWG or DXF, or 3D files as STEP, IGES or SolidWorks, together with material grade, sheet thickness, surface finish, quantity and destination country. If the drawing is not finished yet, send a photo, a sketch or the existing part instead — we review what can be measured from it and reply with the questions that still need answering.
How long does a quotation take?
Enquiries are answered within one business day. Simple laser-cut and bent parts are quoted within 24 hours. Welded frames, assembled units and multi-part structures are quoted after the drawing review and process confirmation, and the date is confirmed in our reply.
Is there a minimum order quantity?
Prototypes are made from a single piece and small batches of 10–50 pieces are routine. Prototype, first batch and repeat volume are quoted together so the numbers stay consistent as the project scales.
Can you work from a sample or a photo if I have no drawing?
Yes. Send the part itself, clear photographs with a rule or caliper in frame, or a dimensioned sketch. We measure what can be measured, list what is still undefined, and confirm it with you before production.
How it’s made: balcony plant stand fabrication — tube bending, coating and weather resistance.
Need a Similar Part?
Most enquiries that start on a page like this are not an order for Balcony Plant Stand — they are a search for a factory that can make something like it. Send us your drawing, 3D model or sample and we will review the manufacturing process and the quotation requirements, then come back with a process plan, a price and a lead time.
We work from 2D drawings, STEP / DWG / DXF / PDF files, or a physical sample if that is all you have.
No complete drawings yet? Describe the part, send photos or a sketch, or send a sample — we can start from there. Discuss your project.
Trade Terms and Delivery
We quote under the standard Incoterms your logistics team already works with, and build the packing and documentation around the one you choose.
- EXW — you collect from our Ningbo facility and run export clearance through your own forwarder.
- FOB Ningbo — we deliver to the vessel at Ningbo port and handle export clearance.
- CIF — we cover carriage and insurance to your named destination port.
- DDP — we handle carriage, insurance, import clearance and duties through to your door.
Send your destination country, target delivery date and preferred trade term together with the drawing. Request a quotation.
Quotation Time
We quote from your drawings. How long that takes depends on what the part asks for:
- Simple parts — quoted within 24 hours. Laser-cut blanks and bent components, supplied with complete 2D or 3D drawings. Mon–Fri, GMT+8.
- Complex assemblies — quoted after the drawing review. Payment kiosks, multi-part welded frames, enclosures with purchased hardware, or anything needing a coating or assembly trial. We confirm a quotation date once the scope is clear.
Production lead time is quoted separately, after drawing review and process confirmation. Send your drawings.
What stands behind this quotation
- Manufacturing since 20162,500 m² Ningbo plant — 3 laser cutting machines (including newer TRUMPF), 4 CNC press brakes and 10 welding stations.
- Shipped to more than 30 export marketsEnclosures, cabinets and formed parts supplied to OEM buyers across Europe, North America and Asia.
- 123 documented product casesMedical device housings, HVAC and heat pump enclosures, agricultural and livestock equipment, industrial hydraulics, material handling trolleys and EV charging cabinets.
- Factory evidence you can checkTUV Rheinland audit reference MIC-ASI243729 and Bureau Veritas reference MIC-ASR263630 available for buyer review under NDA.
Before you send drawings: an NDA is signed on request · first-article inspection is carried out before a batch continues · pricing is staged from prototype quantity to repeat volume · pre-shipment photos and packing records are prepared when the project needs them.