Wall Mounted EV Charger Metal Housing
SKU: FL-EV-007
Compact wall mounted EV charger metal housing for OEM charger brands that need clean appearance, repeatable bends and reliable mounting.
| Material | Galvanized steel, cold-rolled steel, stainless steel or aluminum per drawing |
|---|---|
| Manufacturing Process | Laser cutting + CNC bending + welding/riveting + powder coating + assembly |
| Surface Finish | Powder coating, galvanizing, anodizing or custom finish after drawing review |
| Tolerance | Project-based; typical sheet metal tolerance confirmed after DFM review |
| Drawing Formats | PDF, DWG, DXF, STEP, IGES or SolidWorks files |
| MOQ | Prototype and batch order supported; confirmed by size and process |
| Lead Time | Quoted after drawing review and process confirmation |
| Applications | OEM equipment, cabinets, charging systems, HVAC, energy storage and industrial products |
Wall Mounted EV Charger Metal Housing Manufacturing Notes
A wall mounted EV charger housing must balance appearance, installation strength and internal space. Buyers usually need clean front panels, accurate mounting holes, cable routing and a finish that matches brand colors.
Fulei Metal can support sheet metal parts for front covers, rear boxes, brackets, gland plates and small internal panels. Drawing review focuses on bend sequence, visible welds, fastener positions and coating protection.
What We Check on a Wall-Mounted Charger Housing
Checks focus on the fixing pattern position, panel fit and seam condition, the appearance of welds or rivets on visible faces, coating consistency across panels, and whether the cable entry and gland arrangement has been fitted as drawn. Packaging protection is checked against the finished exterior surfaces, since a housing that arrives marked is a housing that gets rejected.
What to Include in a Wall-Mount Housing RFQ
- 2D drawings or 3D files — PDF, DWG, DXF, STEP or SolidWorks.
- Material grade, thickness, finish and colour, plus the annual quantity.
- The wall type and fixing pattern, the unit mass, the cable entry positions, and the destination market.
Related Charger Housing and Enclosure Pages
A wall-mounted charger housing is a mounting problem before it is a box problem. It carries a defined load on a wall of unknown construction, and its fixing points have to suit both.
What a Wall-Mounted Housing Has to Resolve
This housing is built to the drawing in galvanized steel, cold-rolled steel, stainless steel or aluminium, laser cut, CNC bent, welded or riveted, finished and assembled. Because the wall is specified by someone else, the housing has to work with a fixing pattern the installer will actually use — and a wall-mounted enclosure carrying a cable and a connector is loaded in a way a floor-standing one is not: the weight acts at a distance from the wall, so the top fixings work in tension and the bottom ones in shear.
Material choice follows the location. Galvanized or powder coated steel for general outdoor use; stainless for coastal or washed locations; aluminium where the weight on the wall has to be reduced or where the finish is anodized rather than coated.
What to Settle Before the Housing Is Cut
- Fixing pattern and wall type — masonry, block, timber frame or a steel structure. The pattern and the reinforcement behind it follow from this.
- Load and cable pull — the mass of the unit plus the force applied when a stiff cable is handled. The second is often underestimated.
- Cable entry and strain relief — where the cable enters and what takes its weight, so the load does not land on a gland.
- Service access — whether the front comes off with the housing still on the wall, which is what makes a call-out short.
These are exactly what DFM review is for, and on a wall-mounted part they are worth settling before metal is cut.
How a Project Housing Like This Is Quoted and Checked
Drawings are accepted as PDF, DWG, DXF, STEP, IGES or SolidWorks files. Tolerance is project-based: the figure that applies is the one confirmed after drawing review, because on a mounting-critical part the tolerance that matters is the fixing pattern and the interface to the wall, not a general figure. Prototype and batch quantities are both supported, confirmed against the size and the process.
Inspection follows the buyer drawing and the approved sample: fixing pattern position, panel fit, weld or rivet condition, coating coverage, and gland and entry fitting. Testing and certification of the finished charge point — its electrical safety, its compliance with the applicable charging standard — belongs to the charger manufacturer or the body they nominate. Our scope is the housing as drawn.
Can you work from our existing housing drawing?
Yes. Send the drawing in any of the formats listed and the review comes back with the tolerance and process confirmed, including anything that will be difficult to hold or assemble.
Which material should we choose?
Galvanized or coated steel for general outdoor use, stainless for coastal or washdown locations, aluminium where weight on the wall or an anodized finish matters. Tell us the location and the wall type and the answer is usually clear.
Information Needed to Quote Wall Mounted EV Charger Metal Housing
The drawing, the wall type and fixing pattern, the unit mass and cable arrangement, the material and finish, and the quantity split between prototype and batch. Timing is quoted after drawing review and process confirmation.
Need a Similar Part?
Most enquiries that start on a page like this are not an order for Wall Mounted EV Charger Metal Housing — they are a search for a factory that can make something like it. Send us your drawing, 3D model or sample and we will review the manufacturing process and the quotation requirements, then come back with a process plan, a price and a lead time.
We work from 2D drawings, STEP / DWG / DXF / PDF files, or a physical sample if that is all you have.
No complete drawings yet? Describe the part, send photos or a sketch, or send a sample — we can start from there. Discuss your project.
Trade Terms and Delivery
We quote under the standard Incoterms your logistics team already works with, and build the packing and documentation around the one you choose.
- EXW — you collect from our Ningbo facility and run export clearance through your own forwarder.
- FOB Ningbo — we deliver to the vessel at Ningbo port and handle export clearance.
- CIF — we cover carriage and insurance to your named destination port.
- DDP — we handle carriage, insurance, import clearance and duties through to your door.
Send your destination country, target delivery date and preferred trade term together with the drawing. Request a quotation.
Payment Terms
How a project is paid for is agreed before production starts, and the structure that applies to your order is stated on the quotation and on the order confirmation, so there is no ambiguity later.
- 30% advance payment with the order and the 70% balance before shipment — our standard structure.
- 70% advance payment with the order and the 30% balance before shipment — used for some projects.
- 100% payment in advance before production starts — used for some projects.
If your finance team works to a fixed structure, say so in the first enquiry and we will confirm what applies to your order before you commit. Request a quotation.
Quotation Time
We quote from your drawings. How long that takes depends on what the part asks for:
- Simple parts — quoted within 24 hours. Laser-cut blanks and bent components, supplied with complete 2D or 3D drawings. Mon–Fri, GMT+8.
- Complex assemblies — quoted after the drawing review. Payment kiosks, multi-part welded frames, enclosures with purchased hardware, or anything needing a coating or assembly trial. We confirm a quotation date once the scope is clear.
Production lead time is quoted separately, after drawing review and process confirmation. Send your drawings.
What stands behind this quotation
- Manufacturing since 20162,500 m² Ningbo plant — 3 laser cutting machines (including newer TRUMPF), 4 CNC press brakes and 10 welding stations.
- Shipped to more than 30 export marketsEnclosures, cabinets and formed parts supplied to OEM buyers across Europe, North America and Asia.
- 123 documented product casesMedical device housings, HVAC and heat pump enclosures, agricultural and livestock equipment, industrial hydraulics, material handling trolleys and EV charging cabinets.
- Factory evidence you can checkTUV Rheinland audit reference MIC-ASI243729 and Bureau Veritas reference MIC-ASR263630 available for buyer review under NDA.
Before you send drawings: an NDA is signed on request · first-article inspection is carried out before a batch continues · pricing is staged from prototype quantity to repeat volume · pre-shipment photos and packing records are prepared when the project needs them.