Typical Project Profile — Sheet Metal OEM Programs

Fulei Metal is a build-to-print sheet-metal fabrication shop for mid-volume OEM programs. Since 2016 we have run a 2,500 m² plant in Ningbo, China, cutting, bending, welding, finishing, assembling and packing enclosures, chassis and housings from customer drawings. This page is a straight description of the kind of project we are a fit for — and the kind we are not — so a buyer can tell quickly whether it is worth sending a drawing.

We are not a catalogue supplier and not a prototype-only shop. The work that suits us best is a part that goes into a real product, repeats in batches, and rewards getting the details consistent from the first article to the ten-thousandth piece.

Who this shop is built for

The buyers who get the most from working with us share a shape:

You are likely a fit if…You are likely not a fit if…
You run a repeating OEM program (batches of 100–10,000, not a one-off)You need a single bracket by tomorrow with no drawing
The part is built to your drawing, not pulled from a catalogueYou want a standard enclosure in a stock size — a stockist is cheaper
Consistency across batches matters more than the lowest unit pricePrice is the only criterion and volume is tiny
You value a partner who flags design risk before cutting metalYou want a silent supplier who quotes whatever is drawn
You sell into EU, US, Japan or Korea and need traceable materialsDocumentation, mill certs and finish records are not required

We have quoted buyers in North America, Europe, Japan and Korea and shipped to 30+ countries across 11 industrial sectors — from power and control equipment to medical-device housings and laboratory furniture. Most of those relationships are repeat programs, not single orders.

The shape of a typical program

StageWhat it looks likeTypical timing
First contactDrawing (or sample/photo) + material, quantity, destination, target dateReply within 24 hours, Mon–Fri
Engineering reviewFree DFM pre-review: tolerances, bends, finishes and risk flags before you commit2–3 working days
Sample / first articlePhysical part for your sign-off, with photos and measurement recordsSimple 3–7 days; complex 15–20 days
Mass productionRepeat batches against the approved sample, with first-article and AQL checks25–35 days after sample approval
ReorderSame drawing, same setup, consistent output; call-off or scheduled releasesOn your cadence

Quotations often stall because the drawing never arrives. If you only have a sample, a photo set or a sketch, that is enough to start — we reverse-engineer the geometry and return a CAD model for approval before cutting. See how to start without drawings and our engineering-review process. Drawing creation is a separate paid engineering service, not part of a standard quotation. See our drawing policy for scope, cost and lead time.

What we run in-house

In our own workshop we run three fibre lasers (two at 3,000 W and one at 6,000 W), four CNC press brakes at 250 t with a 3,000 mm bed, and ten welding stations. We handle carbon steel from 0.5 to 18 mm, stainless from 0.5 to 15 mm and aluminium from 0.5 to 10 mm. Brushing and mirror polishing are done in our own shop; finishing that needs a line — anodising, passivation, plating, powder coating — is specified and inspected on audited partner lines we manage.

In scope, in-houseOn audited partner lines
Laser cutting, CNC bending, welding (MIG/TIG/spot)Anodising, passivation, electro-polishing
Brushing and mirror polishingZinc / nickel plating, hot-dip galvanising
Hardware fitting: DIN rail, locks, hinges, fans, filtersPowder coating (colour-matched, documented)
Sub-assembly, labelling, export packing with photos—

Common materials: stainless 304 / 316 / 430, aluminium 5052 / 5754 / 6061, and carbon-steel grades to your specification. Material is verified by mill certificates and spark / magnetic sorting, with third-party chemical analysis available when the specification calls for it.

Quality posture — what we can and cannot claim

We are precise about this because buyers in regulated markets ask. Our quality system is documented to ISO 9001; we do not hold a third-party ISO 9001 certificate, and we will not claim one. Our processes are independently audited — TÜV under number MIC-ASI243729 and Bureau Veritas under MIC-ASR263630, both verifiable on request. Inspection is by first-article control, in-process gauging and AQL sampling. We do not operate a coordinate-measuring machine and do not market CMM inspection — for true CMM-level metrology we schedule it with an audited partner and document the report.

What this means in practice: we can give you traceable materials, a consistent first-article-to-batch record, and finish and process documentation — but we will not put a certificate on the wall that we have not earned.

Is Fulei the right shop for your part?

If your part is a build-to-print enclosure or chassis in the 0.5–18 mm range, repeats in meaningful batches, and you care about a partner who catches design risk early and documents what it builds, we are a strong fit. If you need certified finished equipment, castings, or injection-moulded parts, we are not — and we will say so in the first reply rather than quote around the gap.

The fastest way to find out is to send what you have. A drawing gets the tightest price; a sample or a photo with key dimensions gets us close enough to quote a range and build the CAD. Start an inquiry →

Frequently asked questions

What batch sizes do you handle?

Our sweet spot is repeating OEM programs from about 100 pieces up to 10,000 per release, with scheduled reorders. One-off prototypes are possible but are not where the shop is most cost-effective; very high volumes may suit a dedicated high-run line better, and we will say so.

Do you hold ISO 9001 certification?

Our quality system is documented to ISO 9001, but we do not hold a third-party ISO 9001 certificate. Our processes are audited by TÜV (MIC-ASI243729) and Bureau Veritas (MIC-ASR263630), verifiable on request. We are explicit about this because some buyers need a certificate and should know before they start.

Can you start if I only have a sample or a photo?

Yes. If you send a sample part we can caliper-measure it and reverse-engineer the geometry; a photo set with key dimensions is usually enough to quote a range and build the drawing. Many programs start without a finished CAD file. See how to start without drawings. Drawing creation is a separate paid engineering service, not part of a standard quotation. See our drawing policy for scope, cost and lead time.

Which markets and standards do you build for?

We quote buyers in North America, Europe, Japan and Korea. We build to drawings referencing NEMA 3R/4/4X, IP ratings, RoHS/REACH declarations and equipment standards such as UL 60335-2-40, and we document materials and finishes. We do not certify or list finished equipment — that responsibility stays with the integrator.

What are your lead times?

Simple samples run in 3–7 days, a complex first article in 15–20 days, and mass production in 25–35 days after the sample is approved. Outsourced finishing and any special hardware are scheduled into that window.

How do you keep batches consistent?

Every batch runs against the approved first article, with in-process gauging, AQL sampling and photo records at export packing. Setups are documented so a reorder six months later matches the original. This consistency across batches is the main reason our buyers reorder rather than re-source.

Scroll to Top