Custom Sheet Metal OEM
Stainless Steel Charging Station Cabinet OEM
Fulei Metal manufactures stainless steel charging station cabinet for OEM buyers comparing stainless, SPCC, and SECC cabinet options for private-label charging equipment.
Stainless Steel Charging Station Cabinet OEM Specifications
| Material Options | SPCC / SECC / SUS304 |
|---|---|
| Thickness Range | 1.0-3.0mm |
| Typical Tolerance | ±0.05mm |
| Manufacturing Process | Laser Cutting / CNC Bending / MIG-TIG Welding / Powder Coating |
| MOQ | 1 pc |
| Lead Time | Quoted after drawing review and process confirmation |
| Drawing Formats | PDF, DWG, DXF, STEP, IGES or SolidWorks files |
| Trade Terms | FOB Ningbo, EXW, CIF or project-based terms after quotation |
Choosing Between Stainless and Coated Steel
Charging station cabinets are usually quoted in three materials, and the choice is rarely about strength. It is about where the cabinet stands, how often it is touched, and what the brand wants it to look like after two years.
SUS304 is chosen where the cabinet is exposed to weather or to public handling, and where a brushed or unpainted finish is part of the product design. SPCC and SECC are chosen for painted cabinets, where the coating system carries the corrosion protection and where unit cost matters across a rollout.
We ask where the cabinets are installed and whether they are painted or left bare, because that decides the material and the finish route before any cutting starts.
Building a Cabinet for Public Installation
Blanks are laser cut and formed on CNC press brakes. Charging cabinets are formed with the door opening and the cable exit in mind, so the front face stays flat enough for a door to seal, and the cable exit does not leave a sharp edge where a user can reach it.
Seams are MIG or TIG welded depending on material and thickness, with brackets and internal mounting features welded in fixture. On stainless, weld colour and consistency are controlled, because a visible seam on a bare cabinet is part of the finished appearance.
Painted cabinets are deburred and surface prepared before powder coating; stainless cabinets are finished as specified. Locks, fixings and branding are applied to the buyer’s specification.
What We Check on a Charging Cabinet
Door fit and the flatness of the door opening are checked on the first cabinet, since a door that does not sit flush is the most visible defect on a public installation.
On stainless, weld appearance and surface finish are reviewed against the agreed reference. On painted cabinets, coating coverage is checked at edges and around openings.
Incoming material checks, first-article inspection, in-process dimensional checks and final inspection photos can be provided. Electrical safety and any protection rating for the charging equipment are certified on the assembled product by the equipment maker or a third party; we build the cabinet to the drawing.
Cabinets and Parts for Charging Programs
- Charging station cabinets and pedestals
- Wall-mounted and floor-standing enclosures
- Door assemblies and service access panels
- Internal mounting frames and brackets
- Private-label cabinets produced to buyer artwork
What Speeds Up a Charging Cabinet Quote
- Drawing with door opening and cable exit detail
- Material choice, or the installation environment if undecided
- Painted finish or bare stainless
- Branding, lock and fixing requirements
- Quantity for pilot installation and for rollout
Charging Cabinet Questions
Stainless or coated steel?
SUS304 for exposed or bare-finish cabinets; SPCC or SECC where the cabinet is painted and unit cost across a rollout matters.
Can you build a private-label cabinet?
Yes. Branding, locks and fixings are applied to your specification and artwork.
How do you keep doors fitting flush?
Door openings are formed with the door in mind, and flatness is checked on the first cabinet.
Is the cabinet certified for electrical use?
Certification of the charging equipment is done on the assembled product by the equipment maker or a third party. We build the cabinet to your drawing.
First Steps With Stainless Steel Charging Station Cabinet
Send the drawing, material, finish and quantity through the RFQ form.
Request a Quote for Stainless Steel Charging Station Cabinet OEM
Send your drawings and quantity requirement. Fulei Metal will review the manufacturing route and reply with the information needed for quotation.
Related Stainless Steel Charging Station Cabinet Pages
Trade Terms and Delivery
We quote under the standard Incoterms your logistics team already works with, and build the packing and documentation around the one you choose.
- EXW — you collect from our Ningbo facility and run export clearance through your own forwarder.
- FOB Ningbo — we deliver to the vessel at Ningbo port and handle export clearance.
- CIF — we cover carriage and insurance to your named destination port.
- DDP — we handle carriage, insurance, import clearance and duties through to your door.
Send your destination country, target delivery date and preferred trade term together with the drawing. Request a quotation.
Payment Terms
How a project is paid for is agreed before production starts, and the structure that applies to your order is stated on the quotation and on the order confirmation, so there is no ambiguity later.
- 30% advance payment with the order and the 70% balance before shipment — our standard structure.
- 70% advance payment with the order and the 30% balance before shipment — used for some projects.
- 100% payment in advance before production starts — used for some projects.
If your finance team works to a fixed structure, say so in the first enquiry and we will confirm what applies to your order before you commit. Request a quotation.
Quotation Time
We quote from your drawings. How long that takes depends on what the part asks for:
- Simple parts — quoted within 24 hours. Laser-cut blanks and bent components, supplied with complete 2D or 3D drawings. Mon–Fri, GMT+8.
- Complex assemblies — quoted after the drawing review. Payment kiosks, multi-part welded frames, enclosures with purchased hardware, or anything needing a coating or assembly trial. We confirm a quotation date once the scope is clear.
Production lead time is quoted separately, after drawing review and process confirmation. Send your drawings.
What stands behind this quotation
- Manufacturing since 20162,500 m² Ningbo plant — 3 laser cutting machines (including newer TRUMPF), 4 CNC press brakes and 10 welding stations.
- Shipped to more than 30 export marketsEnclosures, cabinets and formed parts supplied to OEM buyers across Europe, North America and Asia.
- 123 documented product casesMedical device housings, HVAC and heat pump enclosures, agricultural and livestock equipment, industrial hydraulics, material handling trolleys and EV charging cabinets.
- Factory evidence you can checkTUV Rheinland audit reference MIC-ASI243729 and Bureau Veritas reference MIC-ASR263630 available for buyer review under NDA.
Before you send drawings: an NDA is signed on request · first-article inspection is carried out before a batch continues · pricing is staged from prototype quantity to repeat volume · pre-shipment photos and packing records are prepared when the project needs them.